
Machinery
Protection, starting and power-circuit control for motor feeders.
Schneider Electric · TeSys F contactor
TeSys F LC1F Contactors is intended for power-circuit control of large motors and industrial loads. This page brings together the range position, configuration review logic and 12 browsable models. Current, voltage, power, trip or control configurations vary by reference, so selection must use the complete order number.
Open an exact-model page by complete order reference to review specifications, applications and inquiry requirements.

RANGE OVERVIEW
TeSys F LC1F Contactors is intended for power-circuit control of large motors and industrial loads. This page brings together the range position, configuration review logic and 12 browsable models. Current, voltage, power, trip or control configurations vary by reference, so selection must use the complete order number.
Models in the range share a common platform role, but ratings and configuration codes must not be inferred across references. Filter by the power circuit and load first, then review control, mounting and accessories.
CONFIGURATION LOGIC AND REVIEW POINTS

Use the complete reference and power-circuit data to establish the exact rating; do not substitute by series name alone.
Match current, voltage, power or trip configuration to the load and protection-coordination requirements.
Check control voltage, communications, interlocking and auxiliary contacts against the control schematic.
Also review dimensions, wiring, environmental conditions and required accessories.
RANGE MODELS AND KEY DATA
Select a model to open its detail page. The table scrolls horizontally on small screens without widening the page.
| Model | Order reference / configuration | Poles | Rated Current | Coil Voltage | AC-3 Power (380V) |
|---|---|---|---|---|---|
| LC1F1154 3P 115A AC Contactor | LC1F1154 | 3P | 115 A | Coil code 4 — verify exact voltage | 55 kW |
| LC1F1250M7 3P 1250A AC Contactor | LC1F1250M7 | 3P | 1250 A | — | 630 kW |
| LC1F1700M7 3P 1700A AC Contactor | LC1F1700M7 | 3P | 1700 A | — | 900 kW |
| LC1F1854 3P 185A AC Contactor | LC1F1854 | 3P | 185 A | Coil code 4 — verify exact voltage | 90 kW |
| LC1F2100 3P 2100A AC Contactor | LC1F2100 | 3P | 2100 A | Verify from nameplate | 1100 kW |
| LC1F225 3P 225A AC Contactor | LC1F225 | 3P | 225 A | Verify from nameplate | 110 kW |
| LC1F2600 3P 2600A AC Contactor | LC1F2600 | 3P | 2600 A | Verify from nameplate | 1400 kW |
| LC1F4004 3P 400A AC Contactor | LC1F4004 | 3P | 400 A | Coil code 4 — verify exact voltage | 200 kW |
| LC1F500 3P 500A AC Contactor | LC1F500 | 3P | 500 A | Verify from nameplate | 250 kW |
| LC1F5004 3P 500A AC Contactor | LC1F5004 | 3P | 500 A | Coil code 4 — verify exact voltage | 250 kW |
| LC1F6330M7 3P 630A AC Contactor | LC1F6330M7 | 3P | 630 A | — | 335 kW |
| LC1F780M7 3P 780A AC Contactor | LC1F780M7 | 3P | 780 A | — | 400 kW |
REPRESENTATIVE MODEL DATA
SELECTION AND INQUIRY CHECKLIST
TYPICAL APPLICATIONS

Protection, starting and power-circuit control for motor feeders.

Motor control and protection for utilities and HVAC loads.

Frequent switching in conveying, assembly and processing equipment.

Motor circuits and interlocking in continuous-production facilities.
RECOMMENDED MODELS

LC1F1154

LC1F1250M7

LC1F1700M7

LC1F1854
Use the model table for initial screening within the range; confirm final ordering configuration from the complete reference and project conditions.