Machinery
Protection, starting and power-circuit control for motor feeders.
Schneider Electric · TeSys Deca contactor
TeSys D LC1D Contactors
TeSys D LC1D Contactors is intended for power-circuit control of motors, heating and general industrial loads. This page brings together the range position, configuration review logic and 15 browsable models. Current, voltage, power, trip or control configurations vary by reference, so selection must use the complete order number.
Open an exact-model page by complete order reference to review specifications, applications and inquiry requirements.
- 15
- Browsable models
- TeSys D LC1D Contactors
- Product range
- TeSys Deca contactor
- Product type
- LC1D09B7C
- Representative reference
RANGE OVERVIEW
TeSys D LC1D Contactors
TeSys D LC1D Contactors is intended for power-circuit control of motors, heating and general industrial loads. This page brings together the range position, configuration review logic and 15 browsable models. Current, voltage, power, trip or control configurations vary by reference, so selection must use the complete order number.
Models in the range share a common platform role, but ratings and configuration codes must not be inferred across references. Filter by the power circuit and load first, then review control, mounting and accessories.
- Poles3P
- Rated Current9 A
- Coil Voltage24 V AC (B7)
- AC-3 Power (380V)4 kW
CONFIGURATION LOGIC AND REVIEW POINTS
- 01
AC-3/AC-1 duty
Use the complete reference and power-circuit data to establish the exact rating; do not substitute by series name alone.
- 02
Coil control voltage
Match current, voltage, power or trip configuration to the load and protection-coordination requirements.
- 03
Main poles
Check control voltage, communications, interlocking and auxiliary contacts against the control schematic.
- 04
Auxiliary contacts and accessories
Also review dimensions, wiring, environmental conditions and required accessories.
RANGE MODELS AND KEY DATA
Select a model to open its detail page. The table scrolls horizontally on small screens without widening the page.
| Model | Order reference / configuration | Poles | Rated Current | Coil Voltage | AC-3 Power (380V) |
|---|---|---|---|---|---|
| LC1D09B7C 3P 9A 24V AC | LC1D09B7C | 3P | 9 A | 24 V AC (B7) | 4 kW |
| LC1D09F7C 3P 9A 110V AC | LC1D09F7C | 3P | 9 A | 110 V AC (F7) | 4 kW |
| LC1D115Q7C 3P 115A 380–400V AC | LC1D115Q7C | 3P | 115 A | 380–400 V AC (Q7) | 55 kW |
| LC1D12B7C 3P 12A 24V AC | LC1D12B7C | 3P | 12 A | 24 V AC (B7) | 5.5 kW |
| LC1D12F7C 3P 12A 110V AC | LC1D12F7C | 3P | 12 A | 110 V AC (F7) | 5.5 kW |
| LC1D15000Q5C 3P 150A 380V AC | LC1D15000Q5C | 3P | 150 A | 380 V AC (Q5) | 75 kW |
| LC1D18B7C 3P 18A 24V AC | LC1D18B7C | 3P | 18 A | 24 V AC (B7) | 7.5 kW |
| LC1D18F7C 3P 18A 110V AC | LC1D18F7C | 3P | 18 A | 110 V AC (F7) | 7.5 kW |
| LC1D25B7C 3P 25A 24V AC | LC1D25B7C | 3P | 25 A | 24 V AC (B7) | 11 kW |
| LC1D25F7C 3P 25A 110V AC | LC1D25F7C | 3P | 25 A | 110 V AC (F7) | 11 kW |
| LC1D32B7C 3P 32A 24V AC | LC1D32B7C | 3P | 32 A | 24 V AC (B7) | 15 kW |
| LC1D32F7C 3P 32A 110V AC | LC1D32F7C | 3P | 32 A | 110 V AC (F7) | 15 kW |
| LC1D38B7C 3P 38A 24V AC | LC1D38B7C | 3P | 38 A | 24 V AC (B7) | 18.5 kW |
| LC1D38F7C 3P 38A 110V AC | LC1D38F7C | 3P | 38 A | 110 V AC (F7) | 18.5 kW |
| LC1D50AM7C 3P 50A 220V AC | LC1D50AM7C | 3P | 50 A | 220 V AC (M7) | 22 kW |
REPRESENTATIVE MODEL DATA
- Model
- LC1D09B7C
- Series
- TeSys D (LC1D)
- Poles
- 3P
- Rated Current
- 9 A
- Coil Voltage
- 24 V AC (B7)
- AC-3 Power (380V)
- 4 kW
- Auxiliary Contacts
- 1NO + 1NC
- Standards
- IEC 60947-4-1, GB/T 14048.4
SELECTION AND INQUIRY CHECKLIST
- Complete order reference and series
- AC-3/AC-1 duty
- Coil control voltage
- Main poles
- Auxiliary contacts and accessories
- Required quantity and destination
- BOM, drawing or nameplate photo
- Original equipment data for replacements
TYPICAL APPLICATIONS
Pumps and fans
Motor control and protection for utilities and HVAC loads.
Production lines
Frequent switching in conveying, assembly and processing equipment.
Process industries
Motor circuits and interlocking in continuous-production facilities.
RECOMMENDED MODELS
Use the model table for initial screening within the range; confirm final ordering configuration from the complete reference and project conditions.
