ZHIQI ELECTRIC志奇电气

Schneider Electric · TeSys F contactor

TeSys F LC1F Contactors

TeSys F LC1F Contactors is intended for power-circuit control of large motors and industrial loads. This page brings together the range position, configuration review logic and 12 browsable models. Current, voltage, power, trip or control configurations vary by reference, so selection must use the complete order number.

Open an exact-model page by complete order reference to review specifications, applications and inquiry requirements.

TeSys F LC1F Contactors — Schneider Electric
TeSys F LC1F Contactors
12
Browsable models
TeSys F LC1F Contactors
Product range
TeSys F contactor
Product type
LC1F1154
Representative reference

RANGE OVERVIEW

TeSys F LC1F Contactors

TeSys F LC1F Contactors is intended for power-circuit control of large motors and industrial loads. This page brings together the range position, configuration review logic and 12 browsable models. Current, voltage, power, trip or control configurations vary by reference, so selection must use the complete order number.

Models in the range share a common platform role, but ratings and configuration codes must not be inferred across references. Filter by the power circuit and load first, then review control, mounting and accessories.

  • Poles3P
  • Rated Current115 A
  • Coil VoltageCoil code 4 — verify exact voltage
  • AC-3 Power (380V)55 kW

CONFIGURATION LOGIC AND REVIEW POINTS

TeSys F LC1F Contactors — Schneider Electric
  1. 01

    Main-circuit current

    Use the complete reference and power-circuit data to establish the exact rating; do not substitute by series name alone.

  2. 02

    Utilisation category and motor power

    Match current, voltage, power or trip configuration to the load and protection-coordination requirements.

  3. 03

    Coil voltage

    Check control voltage, communications, interlocking and auxiliary contacts against the control schematic.

  4. 04

    Auxiliary contacts and mechanical accessories

    Also review dimensions, wiring, environmental conditions and required accessories.

RANGE MODELS AND KEY DATA

Select a model to open its detail page. The table scrolls horizontally on small screens without widening the page.

ModelOrder reference / configurationPolesRated CurrentCoil VoltageAC-3 Power (380V)
LC1F1154 3P 115A AC ContactorLC1F11543P115 ACoil code 4 — verify exact voltage55 kW
LC1F1250M7 3P 1250A AC ContactorLC1F1250M73P1250 A—630 kW
LC1F1700M7 3P 1700A AC ContactorLC1F1700M73P1700 A—900 kW
LC1F1854 3P 185A AC ContactorLC1F18543P185 ACoil code 4 — verify exact voltage90 kW
LC1F2100 3P 2100A AC ContactorLC1F21003P2100 AVerify from nameplate1100 kW
LC1F225 3P 225A AC ContactorLC1F2253P225 AVerify from nameplate110 kW
LC1F2600 3P 2600A AC ContactorLC1F26003P2600 AVerify from nameplate1400 kW
LC1F4004 3P 400A AC ContactorLC1F40043P400 ACoil code 4 — verify exact voltage200 kW
LC1F500 3P 500A AC ContactorLC1F5003P500 AVerify from nameplate250 kW
LC1F5004 3P 500A AC ContactorLC1F50043P500 ACoil code 4 — verify exact voltage250 kW
LC1F6330M7 3P 630A AC ContactorLC1F6330M73P630 A—335 kW
LC1F780M7 3P 780A AC ContactorLC1F780M73P780 A—400 kW

REPRESENTATIVE MODEL DATA

Model
LC1F1154
Series
TeSys F (LC1F)
Poles
3P
Rated Current
115 A
Coil Voltage
Coil code 4 — verify exact voltage
AC-3 Power (380V)
55 kW
Standards
IEC 60947-4-1, GB/T 14048.4

SELECTION AND INQUIRY CHECKLIST

  • Complete order reference and series
  • Main-circuit current
  • Utilisation category and motor power
  • Coil voltage
  • Auxiliary contacts and mechanical accessories
  • Required quantity and destination
  • BOM, drawing or nameplate photo
  • Original equipment data for replacements

TYPICAL APPLICATIONS

Machinery

Machinery

Protection, starting and power-circuit control for motor feeders.

Pumps and fans

Pumps and fans

Motor control and protection for utilities and HVAC loads.

Production lines

Production lines

Frequent switching in conveying, assembly and processing equipment.

Process industries

Process industries

Motor circuits and interlocking in continuous-production facilities.

RECOMMENDED MODELS

Use the model table for initial screening within the range; confirm final ordering configuration from the complete reference and project conditions.

Message on WhatsApp